Alloy Artifacts

Exploring Ingenuity in Iron ...

Alloy Artifacts Home

Duro and Indestro Tool Identification

[Logo from Duro-Chrome Catalog] [Logo from Indestro Catalog]

This page will look at the tools produced by Duro Metal Products and Indestro Manufacturing, two companies that were prominent in the hand tool business during the middle three-quarters of the 20th century. The main focus will be on tool identification, but we'll also look briefly at the company history, examine the trademark and patent activities, and of course show lots of examples of their tools.

Table of Contents


Introduction

Company History

For even a brief look at the history of these companies, we first need to clarify the relationship between Duro Metal Products and Indestro Manufacturing. A casual observer might at first think that Duro and Indestro were unrelated businesses, but on closer examination Duro and Indestro look and behave more like a single company, with a dual organization set up to promote the branding of their products.

For example, both companies listed their headquarters at the same address, 2649 N. Kildare Ave. in Chicago, and both companies' catalogs show the same two illustrations of their factory buildings. Numerous items in the Duro catalogs were actually products branded Indestro, and Indestro products often listed patents granted to Duro Metal Products. The Indestro catalogs show most of the same products as the Duro catalogs, but with different model numbers assigned to the Indestro pieces.

From these considerations, for our present purpose Duro and Indestro can be treated as a single company with two major product brands. In fact, it appears that the main reason for Indestro may have been to allow production of inexpensive or economy lines of tools, without diluting the high-end reputation of the Duro products.

With the above in mind, Duro Metal Products was founded in 1916 by Norris F. McNaught and William H. Odlum, both of whom would play an active role in product development for many years. The Indestro Manufacturing operation was formed around 1922 or so, and the companies produced tools primarily for the automotive service market. Their early products included such items as hex-drive socket sets, socket wrenches (the early variety, with sockets permanently attached to a bar), and specialty tools. Indestro also produced a variety of other products, including bottle-cappers and kitchen utensils such as egg-beaters. Examples of their early production can be seen in the Duro 634 Socket Wrench and Indestro Socket Wrench.


Sure Seal Bottle Capper Company

[Sure Seal Bottle Capper Logo]
Fig. 1. Early Sure Seal Bottle Capper Logo, ca. 1920.

A recently discovered early logo provides another view of the origin of the Indestro operations. Fig. 1 shows the detail from an early Indestro wrench set, marked "Sure Seal Bottle Capper Co." and "Chicago" around the outside, with "Mfrs. Indestro Products" in the center. This suggests that the Sure Seal Bottle Capper Company was the earlier entity using the Indestro mark, and that bottle-cappers were an important early product. Several patents for bottle-cappers were issued to Harold G. Rice before and after 1920, and some of the later patents were assigned to Indestro.

At the present time we don't have any further information on the Sure Seal Bottle Capper operations, but hope to add more detail in the future.

By the late 1920s and '30s the companies were very actively developing and marketing products for the growing automotive service market. Many patents were granted to Duro Metal Products during this period, covering both new product designs and better ways of producing existing items. By the time the 1939 Duro-Chrome catalog (#39M) was issued, the companies were offering a broad line of tools with both high-end and economy selections.

Duro Metal Products also manufactured a well-regarded line of woodworking machines and other power tools, and produced a separate catalog of such equipment.

During the 1930s, Duro/Indestro was a supplier to at least three major retailers, Sears Roebuck, Montgomery Ward, and Western Auto. The tools supplied included socket sets, drive tools, and wrenches, and were sold both under existing Duro or Indestro brands, as well as private brands produced for the particular retailer. The paragraphs below will show some examples of these supplier arrangements.

The 1931 Sears Spring and Summer catalog listed several "Durobilt" brand socket sets, which are easily recognized as Duro production. The sets included a 45-piece carbon-steel socket set in a tool chest for $4.35, a carbon-steel 36-piece Wrench Set for $2.89, and the latest "Super Durobilt" 40-piece alloy-steel set for $5.98. The latter set is particularly interesting, as it mentions the use of "Chrome Nickel Steel", and was also available with 12-point sockets for a slightly higher $6.75 price. In 1931 Sears had not yet extended its Craftsman brand to include socket sets, so sockets and drive tools were offered only under other brand names. (Other socket sets were sold under the Hinsdale, Merit, and Bobcat brands.)

For Montgomery Ward, Duro/Indestro produced sockets and wrenches for the company's "Riverside" line, and some examples of these tools will be shown in a later Riverside section. A 1935 Montogmery Ward catalog shows a 35-piece chrome-vanadium steel socket set in a toolbox for $8.45; the set can be recognized as Duro production by the socket design and the pressed-flange construction of the ratchet. Also offered are Chrome-Vanadium box-end wrenches and an older 36-piece carbon-steel socket set for just $2.69.

Duro/Indestro supplied products to Western Auto at least as early as 1931 and possibly earlier, as an Indestro CV Socket Set was acquired with a Western Auto receipt dated in 1931. Later in the 1930s, Duro/Indestro was a major producer for Western Auto's "Chrome X Quality" line, and continued to supply products for the later Westcraft and Wizard tool lines. Some examples are shown in the Wizard section.

Duro and Indestro continued to prosper during the 1940s and '50s, but by the 1960s appeared to be losing ground to other competitors. Sometime during the '60s the Indestro operations were formally merged into Duro Metal Products, and the tools began appearing with dual brands "Duro-Indestro". The tool lines were "harmonized", which unfortunately meant that some of the special higher-end features of the Duro-Chrome tools were dropped. The company continued operating through the 1970s and 1980s, and was finally closed in 1990.


Registered Trademarks

Many of the tools produced by Duro and Indestro were marked with one of their well-known registered trademarks, and these of course are easy to identify. However, the companies also used quite a number of informal and unregistered marks for their tools, and these will be described (to the extent they are known) in the sections below. First though, let's review the registered trademarks, using information obtained from the USPTO database.


Indestro Trademark

In 1922 the trademark "Indestro" was registered by Indestro Manufacturing, and the registration listed 6/13/1922 as the date of first use in commerce. [Registration number 0582680.] Since the registered mark is the same as the company name, this strongly suggests that 1922 was also the year in which Indestro Manufacturing was first organized. Whether it operated as a subsidiary of Duro Metal Products or as a separate company is not known, but in any event the companies shared the same buildings and manufacturing facilities.


Duro and Duro-Chrome Trademarks

Duro Metal Products registered the mark "Duro" and listed its first use as 1930. [Registration number 0345576.] This was followed by the trademarks "Duro-Chrome" and the variant "Duro Chrome", registered in 1931. [Registration numbers 0570624 and 0285395, respectively.] The Duro-Chrome trademark was used primarily (perhaps exclusively) for the higher-end Chrome Alloy tools offered by Duro, and the timing of the trademark suggests that the early 1930s were seeing a shift to chrome-alloy tool production.


"Tools of Progress" Trademark

In 1934 Duro Metal Products registered the mark "Tools of Progress" and used this as part of its logo in catalogs and advertisements. [Registration number 335056.] The top of this page shows an example of this trademark as it appears on the cover of Duro-Chrome catalog 38M in 1938.


Wrench Design Trademark

In 1937 Indestro registered an important trademark, the "streamlined" design for its wrenches, and listed 1936 as the date of first use. [Registration number 0346439.]

This trademark is notable in that it doesn't depend on any specific wording, but only on the design itself, so that any wrench made with this distinctive design could still be regarded as marked by Indestro. This would have allowed the company to make tools with the specific "Indestro" branding omitted from the forging, so that the finished tools could be marked with private brands as needed.

[Indestro Chicago Open-End Wrenches with Streamlined Design]
Fig. 2. Indestro Chicago Double-Open Wrenches Showing Streamlined Design.

Fig. 2 at the left shows the streamlined design as it appears on several Indestro double-open wrenches, each marked "Indestro Chicago U.S.A." with "Drop Forged Select Steel" on the reverse. (The reverse is shown later with the discussion of the Select Steel mark.)

In these examples the streamlined design takes the form of depressed panels with pointed darts at the end, and the width of the panels follows the natural shape of the shank. The streamlined design also appears as raised panels with darts on other wrench models.


Triangle Logo Trademark

Indestro registered its inverted triangle logo in 1939, at first including just the word "Tools" above the graphic of the man and anvil. [Registration number 0588070.] Later versions of the logo added the phrase "Tools for Service" on the lower border. The top of this page shows an example of the Indestro triangle logo as it appears on the cover of Indestro catalog 22A, circa 1962.


"Select Steel Tools" Trademark

Both the Duro and Indestro catalogs use the phrase "Select Steel" as though it were a brand name or trademark, although it wasn't registered as such. This usage began fairly early on, probably as soon as they needed to make a distinction between the more expensive Chrome Alloy steel and the economy grade "Select" alloy. (The 1939 catalog identifies "Select Steel" as a Carbon-Manganese alloy.) In 1963 Indestro did finally register the mark "Select Steel Tools", and though this is slightly different from the marks typically forged into the tools, it makes it clear that the companies had regarded "Select Steel" as a brand all along. [Registration number 0733592.]


Patents

Duro Metal Products devoted substantial resources to research and development activities, as evidenced by the numerous patents issued to the company. Most of the patents obtained were assigned to the Duro Metal entity, but a few listed Indestro Manufacturing as the assignee. In some cases the company licensed patents from outside the company.

The table below lists some of the known patents issued to Duro or Indestro, or used by the companies and assumed to have been licensed. The list is not yet complete, but will be expanded as new patents are found.

Table 1. Duro Metal Products Issued and Licensed Patents
Patent No.InventorFiledIssuedDescriptionExamples
RE15,222 H.G. Rice 09/10/1921 11/08/1921 Bottle Capper  
1,744,413 E.H. Peterson et al 07/05/1929 01/21/1930 T-Wrench handle Duro Convertible L-T Handle
1,749,300 Peterson & Odlum 08/29/1927 03/04/1930Reciprocating Valve Grinder  
1,751,657 Peterson & McNaught 05/06/1929 03/25/1930Reciprocating Valve Grinder  
1,788,535 McNaught & Peterson 10/11/1928 01/13/1931Socket wrench kit Indestro 1351 Socket Set
1,798,481 McNaught & Peterson 10/08/1928 03/31/1931Lever action ratchet handle Duro 672 Ratchet
1,798,482 McNaught & Peterson 10/08/1928 03/31/1931Lever action ratchet handle  
1,857,211 W.H. Odlum et al 02/27/1931 05/10/1932Wheel Puller  
1,858,372 Peterson & McNaught 11/09/1931 05/17/1932Valve Spring Compressor  
1,868,839 McNaught & Peterson 07/03/1930 07/26/1932Ratchet Lever  
1,868,840 McNaught & Peterson 07/03/1930 07/26/1932Ratchet Lever (Non-Reversible)  
1,902,878 McNaught & Peterson 06/16/1932 03/28/1933Pressed-Flange Ratchet Construction Duro-Chrome 678D Ratchet,
Indestro Super 3201 Ratchet
1,932,796 McNaught 05/18/1931 10/31/1933Grease Ram  
1,912,725 H.G. Rice 04/22/1929 06/06/1933Socket Wrench Set And Holder  
1,968,215 E.H. Peterson 01/08/1934 07/31/1934Commutator Cleaning Tool  
1,978,590 McNaught & Peterson 01/12/1934 10/30/1934Spring-Loaded Universal Joint Mechanism  
2,027,922 N.F. McNaught 05/29/1935 01/14/1936Hot-Broach Method of Making Sockets  
2,064,351 McNaught & Peterson 01/23/1936 12/22/1936Socket Wrench Kit  
2,065,340 McNaught & Peterson 10/05/1935 12/22/1936Socket Wrench Kit  
2,065,341 McNaught & Peterson 01/23/1936 12/22/1936Socket Wrench Kit  
D103,579 N.F. McNaught 01/18/1937 03/16/1937Drain Plug Multi-Wrench Indestro No. 410 Drain Plug Wrench
D111,026 W.R. Hosford 04/07/1938 08/23/1938Screwdriver Socket Holder  
D119,441 W.A. Sandy 01/20/1940 03/12/1940Battery Pliers With Box-End Wrench Handles Duro-Chrome 2114 Pliers
2,256,624 W.H. Odlum 12/14/1940 09/23/1941Universal Joint  
2,363,350 W.P. Nail 02/11/1944 11/21/1944Battery Terminal Multi-Tool Duro-Chrome 648 Battery Tool
D143,931 W.H. Odlum 07/20/1945 02/19/1946Design for Tool Handle  
2,395,681 W.H. Odlum et al 11/08/1944 02/26/1946Dual-Pawl Ratchet Mechanism Duro-Chrome 699 Ratchet
2,686,582 Odlum & Hosford 03/22/1952 08/17/1954Ratchet Wrench Reversible Drive Mechanism Indestro Super 2775 Ratchet,
Wizard H2833 Ratchet
2,836,273 Odlum & Hosford 06/10/1953 05/27/1958Reversible Ratchet Mechanism [Slide Shift]  
2,841,289 W.H. Odlum et al 09/14/1954 07/01/1958Wall Rack For Tools  

That completes our brief review of trademarks and patents. In the next section, we'll look at some of the informal brands and marks that were used on various Duro and Indestro tools, with the exception of socket markings. Sockets will be covered in a later section.


Alloy Artifacts Home Go To Page:  | 1 |   | 2 |   | 3 |   | 4 |   | 5 |   | 6 |    Next >> Site Index Contact Us